5. Change PIN: allow to change PIN. Input new PIN and confirm it by inputting
again. Remember your new PIN.
6.4 CA menu
Receiver provides one Conditional Access slot for Smart Card. Receiver has build
in module with CONAX system. By using cards in this system provided by
operators, it is possible to watch many scrambled channels coded in this system.
This menu shows detailed information about card inserted into card reader module.
Insert Card with golden pins down.
Note:
All information showed in this menu and submenu are coming from inserted card.
In case if anything is wrong, it could be card problem. After inserting the card
correctly at any time, a message-box will show on the screen with message about
detecting the card, in "card info" menu all available information will be displayed.
6.5 CI menu
Receiver provides one Common Interface slot . Using different CAMs & cards
provided by different CAS operator, you can view many type of scrambled
channels.
In this menu you can see the detail information of the CAM & card inserted in the
slot.
Note:
All information showed in this menu and submenu is coming from CAM & card. In
case something is wrong, it may be the problem of CAM or card.
When you insert the CAM correctly at any time, a message will show on the
screen with information which CAM has been detected by the receiver and if it is
available now.
To Next Page
Loading...
