Supported Components and Capabilities
16 Oracle Database Appliance Owner's Guide • March 2017
Component Oracle Database Appliance
(Version 1)
Oracle Database Appliance
X3-2
Oracle Database Appliance
X4-2
Oracle Database Appliance
X5-2
Server node Two server nodes per
chassis. Each server node
operates independently from
the other server node. The
lower server node is node
0 (SN0). The upper server
node is node 1 (SN1).
Two server nodes. Each
server node operates
independently from the
other server node. The lower
server node is node 0 (SN0).
The upper server node is
node 1 (SN1).
Two server nodes. Each
server node operates
independently from the
other server node. The lower
server node is node 0 (SN0).
The upper server node is
node 1 (SN1).
Two server nodes. Each
server node operates
independently from the
other server node. The lower
server node is node 0 (SN0).
The upper server node is
node 1 (SN1).
CPUs Two 6-core 3.06 GHz Intel
Xeon X5675 processors per
server node.
Two 8-core 2.9 GHz Intel
Xeon E5-2690 processors
per server node.
Two 12-core 2.7 GHz Intel
Xeon E5-2697 v2 processors
per server node.
Two 18-core 2.3 GHz Intel
Xeon E5-2699 v3 processors
per server node.
Memory 96 GB – six 8 GB low-
voltage DDR3 RDIMMs
(single or dual rank) at 1333
MT/s per server node.
Note - Quad-rank DIMMs
are not supported.
256 GB – sixteen 16
GB low-voltage DDR3
RDIMMs at 1600 MT/s per
server node.
256 GB – sixteen 16
GB low-voltage DDR3
RDIMMs at 1600 MT/s per
server node.
256 GB – eight 32 GB low-
voltage DDR4 LRDIMMs at
2133 MT/s per server node.
Note - Optional memory
expansion to 512 GB
or 768 GB. Both server
nodes must have the same
amount of memory. See
“Optional Component
Installation” on page 58.
Storage
devices
Each server node includes:
■ Twenty 3.5-inch SAS
600-GB HDDs in slots
0-19
■ Four 3.5-inch SAS 73-
GB SSDs in slots 20-23
■ Two rear accessed, 2.5-
inch SATA 500 GB
HDDs reserved for
operating system storage
and system booting
■ One internal 4 GB USB
thumb drive
Each server node includes:
■ Two 2.5-inch 600 GB
SAS2 HDDs reserved for
operating system storage
and system booting
The storage shelf and the
optional storage expansion
shelf each include:
■ Twenty 2.5-inch 900 GB
SAS2 HDDs in slots 0-
19
■ Four 2.5-inch 200 GB
SAS SSDs in slots 20-23
Each server node includes:
■ Two 2.5-inch 600 GB
SAS2 HDDs reserved for
operating system storage
and system booting
■ One internal 4 or 8
GB USB thumb drive
(reserved for future use)
The storage shelf and the
optional storage expansion
shelf each include:
■ Twenty 2.5-inch 900 GB
SAS2 HDDs in slots 0-
19
■ Four 2.5 inch 200 GB
SAS SSDs in slots 20-23
Each server node includes:
■ Two 2.5-inch 600 GB
SAS2 HDDs reserved for
operating system storage
and system booting
■ One internal 8 GB USB
thumb drive (reserved
for future use)
The storage shelf and the
optional storage expansion
shelf each include:
■ Sixteen 3.5-inch 4 TB
or 8 TB SAS2 HDDs in
slots 0-15
■ Four 2.5-inch 400 GB
medium endurance SAS
SSDs in slots 16-19
■ Four 2.5-inch 200 GB
high endurance SAS
SSDs in slots 20-23
USB 2.0
ports
Two rear and one internal for
each server node.
Six total (two front, two rear
and two internal) per server
node.
Six total (two front, two rear
and two internal) per server
node.
Six total (two front, two rear
and two internal) per server
node.
PCI Express
(PCIe) I/O
slots
Three external low-profile
PCIe Gen-2 slots (x8) for
each server node. They
contain:
Three external and one
internal low-profile PCIe
Gen-3 slots for each server
node. They contain:
Three external and one
internal low-profile PCIe
Gen-3 slots for each server
node. They contain:
Three external and one
internal low-profile PCIe
Gen-3 slots for each server
node. They contain:
■ PCIe slot 1: Dual Port
QDR InfiniBand M3
To Next Page
Need help?
General