Install the Oracle Database Appliance X3-2/X4-2 DE2-24P Storage Shelf Into a Rack
Chapter4 • Installing the System Into a Rack 83
■
Ensure that the rack meets the requirements in “Rack Compatibility
Requirements” on page 60
■
Observe all precautions in “Safety Precautions When Rackmounting” on page 59
1.
Install the rails in the rack.
■
If you have an unthreaded rack:
a.
Position the front rail location pegs [1] fully inside the appropriate holes
in the front of the rack.
The rail flange [2] must be inside of the cabinet flange, and the rail label facing the
inside of the cabinet.
b.
Insert and loosely tighten one screw through the front of the rack and
into the top hole in the rails [3].
To Next Page
Loading...
Need help?
General