ST 9100 - HARDWARE GUIDE
PREFACE
Purpose
This document is as an overview of the hardware characteristics and specifications for the ST 9100.
Note: This is a Beta Trial document. Information in this document is subject to change.
Notation
A terminal consists of a transceiver unit plus antennas.
Hardware components and hardware labels in this document might not be exactly as shown and are subject to
change without notice.
CAUTION: This safety symbol warns of possible hazards to personnel, equipment, or both. It includes hazards
that will or can cause personal injury, property damage, or death if the hazard is not avoided.
Note: A note indicates information with no potential hazard. A note indicates points of interest or provides
supplementary information about a feature or task.
Numbered lists indicate a series of steps required to complete a task or function.
Bulleted lists highlight information where order or sequence is not crucial.
Reference
The content of the following documents might be useful in conjunction with this guide. These documents are
available from Customer Support or from the ORBCOMM Developer Toolkit.
Document titles and numbers are subject to change without notice.
[N210] IsatData Pro Gateway Web Service 2 User Guide
[N206] MTWSCellular Protocol
[T404] LSF Developer Guide FW v4.x
[T405] IsatData Pro Service API Ref FW v4.x
[T414] ST 9100 Installation Guide
Battery Safety Warnings
CAUTION: Do not short circuit or expose the battery to temperatures above the maximum rated temperature.
CAUTION: Always follow local disposal guidelines to properly dispose of the Lithium-ion battery and the
device.
CAUTION: Store in a cool, well ventilated area. Elevated temperatures can result in shortened battery life.
CAUTION: DO NOT replace the battery. Changing the battery without ORBCOMM’s permission could violate
regulatory conformity.
T413, Version 0.04 BETA © ORBCOMM
®
Proprietary
8
To Next Page
Loading...
Need help?
General