Osram BT Series User Manual

OSRAM BT Control | Applications and settings
24
5.1.1.3 Out-of-the-box features (no app for configuration needed!)
Manual control via the connected pushbutton
— Short press: On/off
— Long press: Dim up/down
— Double press: Storing the actual light level as setpoint for DLHV
(daylight harvesting)
Control via smartphone with the OSRAM BT Control App
— User can switch the light on/off and dim it via smartphone
— User can set a password to limit access
5.1.1.4 Additional configuration options via the OSRAM BT Config App
The controller can be configured via smartphone with the
OSRAM BT Config App.
The BT Config App configuration is not mandatory, but en-
ables more flexibility to adapt the behavior to the customer
requirements.
Important note:
After powering up the controller, it can be configured with the BT Config App for two hours only (as long as no admin
password is stored). After the two-hour delay time has expired, connecting to the controller with the BT Config App is
blocked. The timer can be reset by power-cycling the controller. When an admin password is set, the access to the con-
troller will no longer expire.
Important note:
Save all settings as a profile and use the “Configure multiple devices” feature (see chapter 4) to upload the same settings
on multiple BT Control products. This saves time during luminaire production.
DALI LS/PD LI
DA
DA
L
N
Pe
DALI ECO BT
L
N
PB
PB
DA
DA
DALI LED driver
L
N
Pe
DA
DA

Osram BT Series Specifications

General

Brand	Osram
Model	BT Series
Category	Control Systems
Language	English