Osram BT Series - Page 44

OSRAM BT Control | Applications and settings
44
5.2.3.8 DLHV function with defined light group offset
Depending on the availability of natural daylight and the room setup, the light regulation provides the right amount of light
according to the needs of the customer. As the DLHV function is dedicated to group 1 only, the other light groups – group 2
and group 3 – have to be run with a defined offset compared to group 1 to guarantee an equal light distribution throughout
the room.
Define the light group offset
1. Open the main menu.
2. Open “Current configuration”.
3. Now open the “Light regulation”.
4. Activate the “Group 2 Light Reg-
ulation” and define the “Offset”
according to room requirements.
Repeat step 4 for the “Group 3 Light
Regulation” setup.
5.2.3.9 Change of pushbutton coupler (PBC) setting for group 4 (presentation board)
The default setup of all PBCs is “1: 1-channel Tunable White”. As only group 4 (presentation board) has a dedicated
pushbutton for separate control, only the dedicated PBC setup needs to be changed to “4: 4-channel dimming”. The
pushbutton needs to be connected to input D on the dedicated PBC.
Name Function of input A Function of input B Function of input C Function of input D
1: 1-channel Tunable White
(default)
SP
*
: Switch on/off
LP
**
: Dim up/down
Groups: All (1–4)
SP: Toggle scene
LP: Change color temp.
Groups: All (1–4)
SP: Recall scene 1
LP: ---
Groups: All (1–4)
SP: Recall scene 2
LP: ---
Groups: All (1–4)
2: 2-channel Tunable White SP: Switch on/off
LP: Dim up/down
Group: 1
SP: Switch on/off
LP: Dim up/down
Group: 2
SP: ---
LP: Change color temp.
Group: 1
SP: ---
LP: Change color temp.
Group: 2
3: 2-channel dimming SP: Switch on/off
LP: Dim up/down
Group: 1
SP: Switch on/off
LP: Dim up/down
Group: 2
SP: On
LP: ---
Groups: All (1–4)
SP: Off
LP: ---
Groups: All (1–4)
4: 4-channel dimming SP: Switch on/off
LP: Dim up/down
Group: 1
SP: Switch on/off
LP: Dim up/down
Group: 2
SP: Switch on/off
LP: Dim up/down
Group: 3
SP: Switch on/off
LP: Dim up/down
Group: 4
5: Scene control SP: Recall scene 1
LP: ---
Groups: All (1–4)
SP: Recall scene 2
LP: ---
Groups: All (1–4)
SP: Recall scene 3
LP: ---
Groups: All (1–4)
SP: Recall scene 4
LP: ---
Groups: All (1–4)
6: 1-group Tunable White and
HCL
1)
SP: Switch on/off
LP: Dim up/down
Groups: All (1–4)
SP: ---
LP: Change color temp.
Groups: All (1–4)
SP: Recall scene 1
LP: ---
Groups: All (1–4)
SP: HCL resume
LP: ---
Groups: All (1–4)
2
1
4
3
1)
HCL only applicable with DALI ECO BT RTC Control device
*
SP = Short press
**
LP = Long press