OTTO 1 00 Fast Charger • OMM- 000037 • REV. H
41
© Clearpath Robotics Inc. 2020. All rights reserved. CLEARPATH and OTTO are trademarks of Clearpath Robotics Inc. All other product and company names listed are trademarks
or trade names of their respective companies. The information contained in these documents is the Confidential and/or Proprietary property of Clearpath Robotics Inc. and may not
be duplicated, reproduced or further disclosed without the express written approval of Clearpath Robotics Inc.
11.3 Shutting Down
Danger
Never disconnect the system while it is still under electrical load.
To shut down the system:
1. Remove any robot from the Charge Dock.
2. Deactivate the incoming power by following the Lock Out/Tag Out procedures of the facility in
which the charger is installed.
Electrical Shock
Always follow the Lock Out/Tag Out procedures of the facility in which the charger is
installed.
3. Isolate the system following the Lock Out/Tag Out procedures of the facility in which the charger is
installed to disengage all power to the system.
To Next Page
Loading...