Operation
900-0009-01-00 Rev C 17
Status Screen
The status screen displays system information. See page 18 for detailed information of the different
modes of operation.
The optional OutBack system display shows CC (Charge Controller) status screens for convenient
distant viewing from the installation location. See page 59 for the FLEXmax screens displayed on the
MATE3. Please see pages 71 to 83 to view the FLEXmax screens displayed on the MATE (or MATE2).
Figure 11 Status Screen
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Status Screen
The PV voltage will slowly rise to the battery
voltage level even when the PV breaker is off –
this is normal as the PV capacitors charge up.
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
PV Input Voltage
PV Input Current
Battery Voltage
Output Current
Instantaneous
Kilowatts
Daily Accumulated
Kilowatt-hours
AUX Status
(ON or OFF)
Mode of Operation
See page 20
Pressing SK2 opens the end-o
-day
summary menu and logging.
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Status Screen
In 11.6V 0.0 A
Out 13.8V 0.0 A
0.000 kW 0.0 kWH
AUX: OFF Sleeping
Status Screen
Pressing the first soft key (SK1)
opens the main menu screen.
Navigation
To Next Page
Loading...
Need help?
General
