9
.
Appendix
9. Appendix
Appendix A: Accessories
1 ×DC power adapter
1 × USB power cable
1 × Quick Guide
1 × BNC/Q9 cable
1 × BNC to alligator cable
1 × USB communication cable
Appendix B: General Care and Cleaning
General Maintenance
Do not store or leave the instrument where the liquid crystal display will be
exposed to direct sunlight for long periods of time.
Caution: To avoid any damage to the instrument or probe, do not exposed it to
any sprays, liquids, or solvents.
Cleaning
Inspect the instrument and probes as often as operating conditions require. To
clean the instrument exterior, perform the following steps:
1. Wipe the dust from the instrument and probe surface with a soft cloth. Do
not make any scuffing on the transparent LCD protection screen when clean
the LCD screen.
2. Disconnect power before cleaning your instrument. Clean the instrument
with a wet soft cloth not dripping water. It is recommended to scrub with soft
detergent or fresh water. To avoid damage to the instrument or probe, do not
use any corrosive chemical cleaning agent.
Warning: Before power on again for operation, it is required to confirm
that the instrument has already been dried completely,
avoiding any electrical short circuit or bodily injury resulting
from the moisture.
To Previous Page
Loading...
Need help?
General
