1.General Safety Requirement
1. General Safety Requirement
Before any operations, please read the following safety precautions
to avoid any possible bodily injury and prevent this product or any
other products connected from damage. In order to avoid any
contingent danger, this product is only used within the range
specified.
Check the input power supply Settings according to the power
supply voltage standards in your country.
Only the qualified technicians can implement the maintenance.
To avoid Fire or Personal Injury:
Use Proper Power Cord. Use only the power cord supplied with the
product and certified to use in your country.
Product Grounded. This instrument is grounded through the power cord
grounding conductor. To avoid electric shock, the grounding conductor
must be grounded. The product must be grounded properly before any
connection with its input or output terminal.
Check all Terminal Ratings. To avoid fire or shock hazard, check all
ratings and markers on the instrument. Refer to the user's manual for more
information about ratings before connecting the instrument. Do not exceed
any of ratings defined in the following section.
Do not operate without covers. Do not operate the instrument with
covers or panels removed.
Use Proper Fuse. Use only the specified type and rating fuse for this
instrument.
Avoid exposed circuit. Do not touch exposed junctions and components
when the instrument is powered.
Do not operate if in any doubt. If you suspect damage occurs to the
instrument, have it inspected by qualified service personnel before further
operations.
Use your instrument in a well-ventilated area. Inadequate ventilation
may cause an increasing of temperature or damages to the instrument.
Please keep the instrument well ventilated, and inspect the air outlet and
the fan regularly.
Do not operate in wet conditions.
Do not operate in an explosive atmosphere.
Keep instrument surfaces clean and dry.
To Next Page
Loading...
Need help?
General
