Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 11XTJ43_02_GB
A5. USE OF THE WINCH
After mounting the winch and pulleys, you can use the winch with the controls used
for the rotation of the basket indicated in Fig.10.
Fig. 10
!
ATTENTION
To control the turntable rotation, set up the machine with ALL stabi-
lizers in wide position. On the contrary, the turntable rotation mano-
euvre is not allowed.
!
ATTENTION
Retract the jib completely to use the winch
!
ATTENTION
Move the jib in horizontal position, to use the winch (and to extend
the boom)
!
ATTENTION
If the winch is overloaded, all manoeuvres are off to allow the rope
lowering.
In this situation, the red lamp on the control position is on and still.
To Next Page
Loading...