EasyManua.ls Logo

PALAZZANI RAGNO XTJ 43 - 2.9.7. Circuits Failure; 2.9.8. Lightening; 2.9.9. Risk of Scalding;Burn; 2.9.10. Risks Due to Movement

PALAZZANI RAGNO XTJ 43
191 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 29OM2010_GB
ALT
Keep exposed persons at a safety distance from the dangerous areas
2.10. ADDITIONAL WARNINGS
DANGER
The hydraulic fl ow at high pressure output can cause damage to things
and people.
Make sure all connections to the fl uidic circuit are well connected and
tightened to the actuators througth pipes and fi ttings certifi ed and su-
itable for the pressures.
DANGER
During the machine operation and maintenance, wear helmets, safety
shoes, protective gloves, protective clothing and safety glasses com-
plying with the essential safety requirements set by EU Directives
89/656 / CEE and 89/868 / CEE and applicable laws in the country
where it is required / used
DANGER
Never perform any routine or extraordinary maintenance with the hydrau-
lic energy circuits in pressure and even less with electricity connected. De-
energize all the power supply circuits always in advance.
DANGER
Following the e-energization of the power supplies, ensure that there are
no residual pressure in the circuit. Always release the residual pressure.
!
ATTENTION
Ensure that all personnel involved in the maintenance and use of the ma-
chine is properly trained in accordance with the correct procedures on sa-
fety and operation.
Ensure that all personnel is aware of the residual risks arising from the use
of the machine.

Table of Contents