Tel. 0039 030 6857073 - Fax 0039 030657079 info@palazzani.it - www.palazzani.it
Pag. 12OM1070_GB
With crane:
!
Attention
Is required to lower all the stabilizers for 10 cm using the FN button (like
showed in chapt. 3.11), before lifting the equipment.
• using a 4-arms harness of proper capacity and lenght, fi x the hooks in the holes
on top of the stabilizers (Fig. 1.7)
• lift the machine for load or unloading
• sollevare l’attrezzatura per caricarela o scaricarla dall’autocarro.
Fig. 1.7
The logistic personnel must be trained persons, instructed about the loading/unloading
of the machine. Proper procedures and tools must be used for a safe lifting operation.
!
Attention
Strictly follow the indications and warning here below to grant stabi-
lity and to avoid any risk related to the machine handling.
To Next Page
Loading...