35
Installing lifting mechanism
7.2.5 Installing lifting mechanism
Proceed with the installation of the lifting mechanism from step
“Positioning the stand tube” on page 26.
Fix the lifting mechanism according to the type of console plates
used (see chapter 7.1.5 on
page 26).
For this purpose, use the adjustment gauge indicated on the
installation diagram.
Bolt the tilt cylinders to the platform
(see chapter 9.3 on page 44),
7.2.6 Removing auxiliary device
Release the screw clamps fixing the auxiliary device to the
vehicle chassis.
Remove the auxiliary device from the vehicle chassis.
To Next Page
Loading...
