Section 3E: Bluetooth/IR 163
Bluetooth/IR
Sending Information Over a Bluetooth Connection
You can send an individual entry or file.
1. Make sure the receiving device is ready to
receive a Bluetooth connection.
2. Highlight the entry or file you want to send.
3. Press Menu (right softkey) and select
Beam… (the menu item changes names based
on the type of item you highlighted).
4. Select the receiving device in the list. (A red icon
indicates an IR connection, and a blue icon
indicates a Bluetooth connection.)
When the transmission is complete, “Done” appears next to the name of the
receiving device.
Tip:
To delete the established partnership with a device, go to the Bluetooth
Settings
screen and select Devices. Highlight the connection you want to
remove, press and hold Center on the 5-way, and then select Delete. The
deleted device can no longer automatically connect with your smart
device.
Tip:
Check your battery level before establishing a Bluetooth connection. If
the battery level is low, you can’t make a Bluetooth connection.
To Next Page
Loading...
