164 Section 3E: Bluetooth/IR
Receiving Information Over a Bluetooth Connection
1. Go to your To day screen, and then tap Bluetooth .
2. Check the Turn on Bluetooth box to turn on your smart device’s Bluetooth
feature.
3. Press OK .
4. If you have already set up a partnership with the transmitting device, your
smart device is ready to receive the information. (If you haven’t set up a
connection, check the Make this device discoverable to other devices box to let
the device find your smart device and request a connection.)
5. When your smart device is receiving information, a notification tells you
that a transmission is in progress. (To stop the transmission, press Cancel
[left softkey]; to close the notification, press Dismiss [right
softkey].)
Tip:
If you have trouble receiving information over a Bluetooth connection,
press Start and select Settings. Select the Connections tab, and then select
Beam. Make sure the Receive all incoming beams box is checked.
To Next Page
Loading...
