Section 3E: Bluetooth/IR 165
Bluetooth/IR
Synchronizing Over a Bluetooth Connection
1. Set up your computer for Bluetooth wireless communication. (See the
documentation that came with your computer for details. In most cases
your computer must support the Virtual Serial Port profile and this profile
must be turned on.)
2. Set up ActiveSync on your computer for Bluetooth wireless communication.
See ActiveSync Help on your computer for details.
3. Go to your To day screen, and then tap Bluetooth .
4. Check the Turn on Bluetooth box to turn on your smart device’s Bluetooth
feature.
5. Press OK .
6. Press Start and select Programs.
7. Select ActiveSync .
8. Press Menu (right softkey) and select Connect via Bluetooth.
9. If this is the first time you’re making a Bluetooth connection to this
computer, follow the onscreen prompts to set up a Bluetooth partnership
with this computer.
Before You
Begin:
䢇 Make sure your computer is equipped with Bluetooth wireless
technology.
䢇 Install the synchronization software from the CD that came with
your smart device, if you have not already done so. See “Installing
the Desktop Synchronization Software” on page 31.
To Next Page
Loading...
