- 121 -
When this device and a computer for editing are connected using a USB 3.0 Cable (commercially-
available), image data in the SD card can be transferred.
≥ This unit supports USB 3.0.
≥ Concerning non-linear editing, refer to the instruction manual of your editing software.
≥ It is impossible to write data to the SD card on this unit from a PC.
Operating environment (mass storage)
≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
∫ If using Windows
≥ Operation is not guaranteed in the following cases.
j Operation on an upgraded OS.
j Operation on an OS other than the one pre-installed.
∫ If using Mac
Linking to external devices
Connecting to a PC
(File transfer/nonlinear editing)
OS Windows 10 (32 bit/64 bit)
Windows 8/Windows 8.1 (32 bit/64 bit)
Windows 7 (32 bit/64 bit) SP1
CPU 1 GHz or higher
32-bit (k86) or 64-bit (k64) processor
RAM 2 GB or more (64 bit)/1 GB or more (32 bit)
Interface USB port
Other requirements Mouse or equivalent pointing device
PC Mac
OS OS X v10.10
CPU Intel Core 2 Duo or better
RAM 2GB or more
Interface USB port
Other requirements Mouse or equivalent pointing device
To Next Page
Loading...
