- 39 -
∫ Menu item
[RB GAIN CONTROL SETTING] (l 134)
This function sets color saturation and phase. It applies effects on whole images. It cannot be set to
individual color hue.
∫ Menu item
This function sets color saturation and phase. It applies individual effect on 16 phases in an image.
It can be set to individual color hue.
∫ Menu item
[COLOR CORRECTION SETTING] (l 136)
This function sets the black level that is to be the reference of luminance.
∫ Menu item
[MASTER PED] (l 137)
This function optimizes the tone of images.
∫ Menu item
This function sets the compression of video signals to prevent white saturation in images.
∫ Menu item
Chroma setting function
[CHROMA LEVEL]: Adjusts the color density. (l 135)
[CHROMA PHASE]: Adjusts the color balance. (l 135)
Color correction function
Black control function
Gamma function
[GAMMA MODE]: Sets the optimal tone and contrast of images for the scene to be
recorded. (l 137)
[BLACK GAMMA]: Sets the gamma curve for dark areas.(l 138)
[BLACK GAMMA RANGE]: Sets the upper limit on the compression/expansion of the
[BLACK GAMMA] setting. (l 138)
Knee function
[KNEE MODE]: Sets the compression level of highly bright image signals
received by the image sensor to minimize white saturation.
(l 138)
[KNEE MASTER POINT]: Adjusts the knee point position in 0.5% steps. (l 138)
[KNEE MASTER SLOPE]: Sets the knee inclination. (l 139)
To Next Page
Loading...
