- 47 -
≥ [CUSTOM AF], [AF SPEED] and [AF SENSITIVITY] cannot be set in Variable Frame Rate Mode.
(l 91)
≥ [AF SPEED] and [AF SENSITIVITY] cannot be set in Manual Focus Mode.
≥ When a faster [AF SPEED] value is selected, focus mechanism noise will be more audible. As a
result, the noise may be recorded while recording is in progress.
∫ AF Area Range Adjustment
You can adjust the effective area width for Auto Focus according to the size of the subject.
≥ Switch to Auto Focus Mode. (l 44)
1 Select the menu.
≥ To cancel the settings, set [AF AREA WIDTH] to [OFF].
≥ If you push the jog dial in Step 2, the AF area frame turns yellow, allowing you to select
[RETURN]/[EXIT] by rotating the jog dial. Push the jog dial to set the selected item.
≥ You can also adjust AF area width by registering [AF AREA WIDTH] to a USER button. (l 90)
≥ This function is not available in the following cases:
j In manual focus mode (l 44)
j When using Area Mode (l 82)
j During Freeze Frame (l 81)
One Push AF
If you press the PUSH AUTO button in Manual Focus Mode, the camera performs high-speed
focusing until the image is focused.
≥ Switch to Manual Focus Mode. (l 44)
Press PUSH AUTO button.
≥ Auto Focus will be activated and the camera will perform high-speed focusing until the image is
focused.
≥ The focus setting returns to Manual Focus Mode once the image is focused or a certain time has
elapsed.
: [SW SETUP] # [AF AREA WIDTH] # [SET]
2 Push the jog dial.
3 Rotate the jog dial to adjust the AF area
frame.
A [RETURN]
B AF area frame
C [EXIT]
4 Touch [EXIT] to complete the setting.
≥ will be displayed on the screen.
AF-AREA
To Next Page
Loading...
