- 89 -
≥ You can record an image with little white saturation if you manually adjust the shutter speed or
brightness not to display zebra pattern. (l 59, 63)
≥ The zebra pattern does not appear on the images actually recorded.
≥ It is also possible to adjust the level of the zebra pattern to be displayed. (l 171)
≥
It is also possible to change the [ZEBRA MODE] setting to change the display time for the zebra
pattern display.
(l 155)
≥ Register “Optical Image Stabilizer” to a USER button. (l 74)
This enables/disables the Image Stabilizer. (l 42)
≥ Register “Scene File” to a USER button. (l 74)
You can save the scene number settings of [CUSTOMIZE SCENE] to the SD card or load them
from the SD card to this unit.
∫ Saving custom scene settings
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [SAVE].
3 Touch the name of the scene file.
≥ All scene number settings will be saved.
≥ Up to 8 files can be saved.
≥ If you have touched the name of the existing scene file, touch [YES] to overwrite it.
4 Touch [EXIT] to complete the setting.
∫ Assigning saved scene files to custom scenes
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [LOAD].
3 Touch the name of the scene file you want to load.
4 Touch the scene number to which you want to assign the scene file.
≥ Settings of the scene number you have touched will be loaded, and then assigned to the
corresponding scene number in [CUSTOMIZE SCENE].
≥ If you touch [ALL], settings of all scene numbers will be loaded.
5 Touch [EXIT] to complete the setting.
≥ You can also access this function by selecting menu items.
[SCENE FILE] # [SCENE FILE] # [LOAD] or [SAVE]
Optical Image Stabilizer
Scene File
To Next Page