- 40 -
It can be zoomed up to 13k.
≥ (When the picture size of [REC FORMAT] (l 142) or [OUTPUT FORMAT] (l 147) is
1920k1080 or below)
It can zoom up to approx. 20k when the [i.Zoom] is set to [ON]. (l 157)
≥ It is possible to change the unit of the zoom magnification display by changing the [ZOOM/
FOCUS] setting. The setting can also be changed so that the display disappears from the screen.
(l 173)
≥ When [FOCUS MACRO] is set to [OFF], subjects at a distance of approximately 1.0 m (3.3 feet)
to infinity can be brought into focus. When [FOCUS MACRO] is set to [ON] and the zoom position
is at the W end, subjects at a distance of approximately 10 cm (3.93 q) to infinity can be brought
into focus. (l 94, 154)
1 Slide the ZOOM switch.
2 (Set the ZOOM switch to [MANU])
Operate the zoom ring.
(Set the ZOOM switch to [SERVO])
Operate the zoom lever/sub zoom lever.
Recording
Using the zoom
MANU: Zoom operation can be done using the zoom ring.
SERVO: Zoom operation can be done using the zoom lever/sub zoom lever.
Zoom ring A
A side:
Wide-angle recording (zoom out)
B side:
Close-up recording (zoom in)
T side: Close-up recording (zoom in)
W side: Wide-angle recording (zoom out)
TTT
WW
WW
TT
WW
ZOOM
MANU SERVO
A Zoom ring
B Zoom switch
C Zoom lever
D Sub zoom lever
A
B
To Next Page
Loading...
