- 41 -
≥ If you take your finger off the zoom lever during zoom operation, the operation sound may be
recorded. When returning the zoom lever to the original position, move it quietly.
When [i.Zoom] is set to [ON], you can zoom in while maintaining the beauty of high-definition picture
quality up to a magnification of approx. 20k.
≥ Set [REC FORMAT] or [OUTPUT FORMAT] to a setting with a picture size of 1920k1080 or
below. (l 142, 147)
1 Select the menu.
≥ The zoom magnification display will change.
* You can select a value between 1.00 and 1.54.
≥ If you touch the screen, i.Zoom button icons are displayed.
2 Touch the i.Zoom button icons (
/
) to change the i.Zoom
magnification.
≥ You can use i.Zoom by registering [i.Zoom] to a USER button. (l 74)
≥ This function is not available in the following cases:
j In Variable Frame Rate Mode (l 91)
j When [REC FORMAT] or [OUTPUT FORMAT] is set to a setting with a size of 4K (4096k2160)
or UHD (3840k2160)
j During Freeze Frame (l 81)
≥ [i.Zoom] is canceled in the following cases.
j If you turn the unit off
j If you press the THUMBNAIL button
j When [USB MODE SELECT] is set to [DEVICE] and this unit is connected to a PC. (l 122)
When [FAST ZOOM] is set to [ON], you can use Fast Zoom while operating the zoom with the zoom lever.
1 Select the menu.
2 Push the zoom lever fully to operate the zoom.
≥ The zoom magnification display changes when using Fast Zoom. (Example: 99)
Adjusting the i.Zoom magnification
: [SW SETUP] # [i.Zoom] # [ON]
(Example)
A Zoom magnification
B i.Zoom magnification*
C i.Zoom button icons
D Zoom magnification
Using Fast Zoom
: [SW SETUP] # [FAST ZOOM] # [ON]
iZ99 1.00
SCN1 SCN2 SCN3 SCN4 SCN5 SCN6
MENU
iZ99 1.00iZ99 1.00iZ99 1.00
W
i.Zoom.Zoom
T
i.Zoom.Zoom
ATW
DRS
PRE-REC
To Next Page
Loading...
