- 28 -
The recording images or playback images on the viewfinder can be selected between color/black
and white.
Select the menu. (l 30)
≥ If you adjust the [COLOR] setting in [EVF SETTING], [EVF COLOR] will be set to [ON].
It adjusts sensitivity of eye sensor.
1 Select the menu. (l 30)
2 Touch / to adjust settings.
≥ You can select a value between s4 and r4.
3 Touch [EXIT] to complete the setting.
≥ When the [LCD/EVF OUTPUT] is set to [LCD], this item cannot be set. (l 24)
Recording yourself
≥ Change the mode to Recording Mode. (l 23)
Rotate the LCD monitor towards the lens side.
≥ Displaying during the recording yourself can be
switched by setting [SELF SHOOT]. (l 175)
≥ Only some indications will appear on the screen when the [SELF SHOOT] is set to [MIRROR].
When appears, return the direction of the LCD monitor to normal position and check the
warning/alarm indication. (l 185)
≥ The LCD monitor display changes as follows when Self Shoot is used:
j The viewfinder image is displayed.
j The display size becomes smaller.
[EVF COLOR]
: [DISP SETUP] # [EVF COLOR]# [ON] or [OFF]
[ON]: Displayed in color
[OFF]: Displayed in black and white
[EYE SENSOR]
: [DISP SETUP] # [EYE SENSOR]
MENU
MENU
To Next Page
Loading...
