- 170 -
Switches the output setting of time code information when this unit is connected to another device
(HDMI-SDI converter, etc.) with an HDMI cable.
≥ (In Playback Mode)
Touch the play mode select icon, and set this unit to Motion Picture Playback Mode.
(l 101)
When [ON] is selected, you can adjust the headphone volume in Recording Mode with the jog dial.
(l 100)
Selects the test tone output when color bars are displayed. (l 95)
This sets the setup level of 480i image signals.
≥ Set [SYSTEM FREQ] to [59.94Hz]. (l 141, 178)
≥ AG-DVX200PJ/PB: This function’s default setting is [7.5%A].
AG-DVX200EJ/EN/ED/PX: This function’s default setting is [0%].
This sets how to turn on/off the LCD monitor and viewfinder. (l 24)
[HDMI TC OUTPUT]
[ON]/[OFF]
[VOLUME]
[ON]/[OFF]
[TEST TONE]
[OFF]: Does not output a test tone.
[LEVEL 1]: Outputs a high volume test tone.
[LEVEL 2]: Outputs a low volume test tone.
[VIDEO SETUP]
[0%]/[7.5%A]
[LCD/EVF OUTPUT]
[AUTO]/[LCD]/[EVF]
To Next Page
Loading...
