- 166 -
Audio Setup
All default settings are indicated with underlined text.
Reduces the level of low-pitched sound for audio channel 1.
≥ You may not see the full effect depending on the recording conditions.
Reduces the level of low-pitched sound for audio channel 2.
≥ You may not see the full effect depending on the recording conditions.
≥ Set the CH1/CH2 switch to MANU. (l 68)
≥ Set [AUDIO ALC CH1]/[AUDIO ALC CH2] to [ON]. (l 69)
If you set this item to [ON], when ALC works for either of the audio channels, it will also work for the
other audio channel. (l 69)
If you set this item to [ON], you can reduce the audio noise of audio channel 1.
It will record with natural sound when set to [OFF]. (l 69)
If you set this item to [ON], you can reduce the audio noise of audio channel 2.
It will record with natural sound when set to [OFF]. (l 69)
: [AUDIO SETUP] # desired setting
[AUDIO LOW CUT CH1]
[ON]/[OFF]
[AUDIO LOW CUT CH2]
[ON]/[OFF]
[AUDIO ALC LINK]
[ON]/[OFF]
[AUDIO ALC CH1]
[ON]/[OFF]
[AUDIO ALC CH2]
[ON]/[OFF]
MENU
To Next Page
Loading...
