- 80 -
≥ This function is not available in the following cases:
j When [REC FORMAT] is set to [UHD 2160/59.94p 150M] or [UHD 2160/50.00p 150M] (l 142)
j During Freeze Frame (l 81)
≥ To adjust the brightness, refer to page 59.
≥ Register “Recording Check” to a USER button. (l 74)
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31)
Approximately 2 seconds at the end of the video recorded last can be played back. It will return to
recording screen once the playback is completed.
≥ Playback operation is not possible during the Recording Check.
≥ Recording Check is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When [OUTPUT BITS] is set to [4:2:2(10bit)]
j When the setting of [REC FORMAT] is changed (l 142)
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS] or [BACKGROUND]. (l 159)
j PRE-REC is used (l 86, 163)
j During the Interval Recording (l 162)
j During Freeze Frame (l 81)
≥ Register “Last Scene Delete” to a USER button. (l 74)
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31)
The motion picture recorded last can be deleted.
Deleted scenes cannot be restored.
1 Press USER button or touch USER button icon in the recording screen.
2 Touch [YES].
≥ It will return to recording screen without deleting by touching [NO].
≥ Last Scene Delete is not possible in following cases:
j When the unit is turned on/off
j When the THUMBNAIL button is pressed
j When the SD card is inserted/removed
j When [OUTPUT BITS] is set to [4:2:2(10bit)]
j When the setting of [REC FORMAT] is changed (l 142)
j Set [2 SLOTS FUNC.] to [SIMULTANEOUS], [BACKGROUND] or [DUAL CODEC]. (l 159)
j During the Interval Recording (l 162)
Recording Check
Last Scene Delete
To Next Page
Loading...
