- 164 -
Selecting [ON] enables Infrared Recording Mode, allowing you to record images in the dark. (l 84)
≥ Switch to Manual Focus. (l 44)
You can register a focus position to Focus Transition. (l 52)
You can set the length of time in which the focus will shift during Focus Transition. (l 54)
≥ This function’s default setting is 2 seconds.
You can start recording and Focus Transition simultaneously. (l 54)
You can set the length of time before Focus Transition starts. (l 55)
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31)
You can stamp the date and time of recording on the images you record.
≥ appears on the screen.
≥ The display mode and format of the date and time of recording to be stamped vary depending on
the settings for [DATE/TIME] and [DATE FORMAT]. (l 173)
≥ The month of the date and time of recording is recorded in English.
[INFRARED REC]
[ON]/[OFF]
[FOCUS TRANSITION]
[SET][OFF]
[FOCUS TRANSITION TIME]
[DIRECT]/[2-15 SEC.]/[20 SEC.]/[30 SEC.]/[45 SEC.]/[60 SEC.]/[90 SEC.]
[FOCUS TRANSITION REC]
[1]/[2]/[3]/[OFF]
[FOCUS TRANSITION WAIT]
[0 SEC.]/[5 SEC.]/[10 SEC.]
[TIME STAMP]
[ON]/[OFF]
To Next Page
Loading...
