- 156 -
You can switch the type of color bars to be displayed when you press the BARS button. (l 95)
≥ When the default setting for [SYSTEM FREQ] is [59.94Hz]:
This function’s default setting is [TYPE 1].
When the default setting for [SYSTEM FREQ] is [50.00Hz]:
This function’s default setting is [TYPE 2].
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31)
Enable/disable of the sub recording start/stop button on the handle can be switched.
When [ON] is selected, you can use Fast Zoom when operating the zoom with the zoom lever.
(l 41)
Enable/disable of the sub zoom lever on the handle can be switched. Zoom speed will be different
depending on the setting.
≥ The larger the value is, the faster the zoom speed becomes, and vice versa.
Changes the zoom magnification setting of Digital Zoom. (l 79)
[BARS TYPE]
[TYPE 1] [TYPE 2] [TYPE 3]
[SUB REC BUTTON]
[ACTIVE]/[INHIBIT]
[FAST ZOOM]
[ON]/[OFF]
[SUB ZOOM]
[OFF]/[1]/[2]/[3]/[4]/[5]/[6]/[7]
[DIGITAL ZOOM]
[k2]/[k5]/[k10]/[TOGGLE]
To Next Page
Loading...
