- 13 -
∫ Adjust the length of the hand strap so that it fits your hand.
Adjust the hand strap according to the size of your hand.
≥ If you find it difficult to fasten the buckle B, move the pad A towards you, and fasten the buckle
B again.
∫ Attaching the eye cup
1 Align the mounting mark on the eye cup mount with the corresponding mark on
the eyecup.
2 Attach the eye cup so that the notch on the eye cup mount is aligned with the
protrusion inside the eye cup.
≥ Push the eye cup in until it reaches the mounting mark. (D)
∫ Attaching the Shoulder strap
We recommend that you attach the shoulder strap (supplied) before going out of doors to record so
as to avoid dropping this unit.
1 Open the buckle.
2 Pull the end of the belt.
A Mounting marks
B Notch
C Protrusion
A 20 mm (0.8 q) or longer
To Next Page
Loading...
