- 138 -
This sets the gamma curve of dark areas.
1 Touch [BLACK GAMMA].
2 Touch / to adjust settings.
≥ You can select a value between s8 and r8.
≥ Making adjustments in the – direction compresses dark areas, while making adjustments in the +
direction expands them.
3 Touch [EXIT] to complete the setting.
≥ The default setting that is assigned to [SCENE1] in [CUSTOMIZE SCENE] is “0”.
This sets the upper limit on the compression/expansion of the [BLACK GAMMA] setting.
1 Touch [BLACK GAMMA RANGE].
2 Touch the desired setting item.
3 Touch [EXIT] to exit the menu screen.
To avoid overexposure, select the compression level of the high intensity video signals received
through the image sensor.
1 Touch [KNEE MODE].
2 Touch the desired setting item.
3 Touch [EXIT] to exit the menu screen.
This adjusts the knee point position in 0.5% steps when [KNEE MODE] is set to [MANUAL].
1 Touch [KNEE MASTER POINT].
2 Touch / to adjust settings.
≥ You can select a value between 80.0 and 107.0.
3 Touch [EXIT] to exit the menu screen.
≥ The default setting that is assigned to [SCENE1] in [CUSTOMIZE SCENE] is “93.0”.
[BLACK GAMMA]
[BLACK GAMMA RANGE]
[1] (approx. 20%)/[2] (approx. 30%)/[3] (approx. 40%)
[KNEE MODE]
[AUTO]: Sets the level automatically according to the signals received.
[MANUAL]: Applies the [KNEE MASTER POINT] and [KNEE MASTER SLOPE]
settings.
[OFF]: Disables the Knee function.
[KNEE MASTER POINT]
To Next Page
Loading...
