- 148 -
This sets the aspect ratio of images to be recorded with a [REC FORMAT] setting of [SA 480/59.94i]
or [SA 576/50.00i].
≥ Set [OUTPUT BITS] to [4:2:2(8bit)]. (l 31)
≥ Set [REC FORMAT] to [SA 480/59.94i] or [SA 576/50.00i]. (l 142)
≥ This function is not available in the following cases:
j When [REC FORMAT] is set to an option other than [SA 480/59.94i] or [SA 576/50.00i] (l 142)
j When [OUTPUT BITS] is set to [4:2:2(10bit)]
j During Freeze Frame (l 81)
This sets the optimal recording mode for the recording environment.
≥ [H.SENS] is displayed on the screen when [HIGH SENS.] is selected.
≥ This function is not available in the following cases:
j In Variable Frame Rate Mode (l 91)
j During Freeze Frame (l 81)
This sets the camera number for this unit.
1 Touch [CAMERA NUMBER SET].
2 Touch / to change the Camera Number.
≥ Numbers between 0 and 9 can be set.
3 Touch [RETURN].
≥ Touch [EXIT] to exit the menu screen.
≥ This function’s default setting is “0”.
[ASPECT CONVERT]
[SIDE CROP]: Records images in standard 4:3 mode. The sides will be cut off.
[LETTERBOX]: Records images in the 16:9 aspect ratio. Black bands at the top and bottom of
the picture will be recorded. Since the screen size of the viewfinder and LCD
monitor of this unit is 16:9, black bands do not appear at their top and bottom.
[SQUEEZE]: Records images by compressing images in the horizontal direction. When
recorded images are played back on a wide-screen external monitor, they
appear in the 16:9 aspect ratio.
[HIGH SENS. MODE]
[NORMAL]: Select this setting when the light level of the recording environment is
normal.
[HIGH SENS.]: Select this setting when recording in a dark environment.
[CAMERA NUMBER SET]
To Next Page
Loading...
