- 65 -
If you press the jog dial when the shutter speed is displayed as a decimal number, the Synchro
Scan setting will be displayed. You can fine-adjust the shutter speed by adjusting the Synchro Scan
setting. This will minimize flickering and horizontal bars in images.
≥ Set [SHUTTER DISPLAY CHG] to [sec]. (l 172)
1 Press the SHUTTER button
2 When the shutter is displayed as a decimal number (e.g.,
1/60.0), press the jog dial.
≥ The display on the screen will switch from [ SHUTTER] to
[ SYNCHRO], and the Synchro Scan setting will be displayed.
3 Adjust the Synchro Scan setting by rotating the jog dial.
≥ You can adjust the setting faster by rotating the jog dial while pushing and holding it.
≥ To minimize flickering and horizontal bands, look at the screen while adjusting the shutter speed.
4 Push the jog dial to set.
≥ The set shutter speed will also be applied to the [SYNCHRO SCAN] menu setting. (l 132)
Shutter speed range for the Synchro Scan setting
The shutter speed range varies depending on the size and frame rate in [REC FORMAT] or
[OUTPUT FORMAT]. (l 142, 147)
Making adjustments with Synchro Scan
Frame rates Shutter speed
59.94p/59.94i
(When the size for [REC FORMAT] or [OUTPUT FORMAT] is UHD
(3840k2160))
1/60.0 to 1/249.7
(When the picture size for [REC FORMAT] or [OUTPUT FORMAT] is
1920k1080 or below)
1/60.0 to 1/249.8
29.97p 1/30.0 to 1/249.8
23.98p
1/24.0 to 1/249.6
24.00p
50.00p/50.00i 1/50.0 to 1/250.0
25.00p 1/25.0 to1/250.0
To Next Page
Loading...
