Security Warning dialog (for Windows 2000)
To view video images (i.e., MPEG-4 and MJPEG images) or use the camera’s audio features, ActiveX Controls
must be installed on your PC. If ActiveX Controls need to be installed on your PC, the [Security Warning] dialog
will be displayed when trying to view video images (MPEG-4 or MJPEG) for the first time. You can install
ActiveX Controls by clicking [Yes] when the following dialog is displayed, however, you must be logged into
your PC as a user with Administrator privileges.
Note
• If ActiveX Controls cannot be installed, download them from the Panasonic Network Camera website
(http://panasonic.co.jp/pcc/products/en/netwkcam/).
If you cannot install ActiveX Controls
If you cannot see video (MPEG-4 or MJPEG) images in Internet Explorer
Confirm the following Internet Explorer settings.
1. Click [Tools]®[Internet Options]®[Security] tab and click [Custom level] on the web browser.
2. Under [Download signed ActiveX controls], select [Prompt].
3. Under [Run ActiveX controls and plug-ins], select [Enable].
If you need to install ActiveX Controls, you can download them from the Panasonic Network Camera support
site (http://panasonic.co.jp/pcc/products/en/netwkcam) or install them using the CD-ROM included with your
camera.
1. After downloading the ActiveX Controls installer or inserting the CD-ROM in your PC, restart the PC.
2. Confirm that Internet Explorer is closed.
3. Double-click the downloaded ActiveX Controls installer, or open the [ocx] folder on the CD-ROM and
double-click [ActiveXInst.exe].
Note
• After installing or enabling ActiveX Controls, you may need to wait a moment before camera images
are displayed.
12 Operating Instructions
1.2 Viewing Live Camera Images
To Next Page
Loading...
