3.1 Accessing the Camera from Your Mobile Phone
1. Enter http:// followed by the IP address of the camera and /mobile, then press [OK].
Example: http://***.***.***.***/mobile
If the camera’s port number is a port number other than 80, enter “:” and the port number after the IP
address.
Example: http://***.***.***.***:50001/mobile
If you have registered with a DNS service, such as Viewnetcam.com (see Page 75), enter the URL
instead of the IP address.
Example: http://bob.viewnetcam.com
2. If an authentication dialog is displayed, enter the user name and password.
• A still image from the camera is displayed.
• If the camera image is not displayed properly, try accessing the camera by entering one of the following
instead of /mobile.
– /mobileh (for HTML)
– /mobilex (for XHTML)
Note
• If the camera is configured to allow access from guest users (i.e, anonymous users; see Page 107),
users can access the camera’s mobile phone pages using a mobile phone or PC without entering a
user name or password.
Operating Instructions 63
3.1 Accessing the Camera from Your Mobile Phone
To Next Page
Loading...
