Panasonic BL-C111A - Network Camera - Pan - Configuring the Camera to Send Trigger Notifications

2.5 Configuring the Camera to Send Trigger
Notifications
When configuring the camera to buffer or transfer images by sensor or by the motion detection feature, you
can configure the camera to send notifications via E-mail (see Page 45) or HTTP (see Page 48) when the
camera is triggered.
Note
• Notifications cannot be sent when buffering or transferring images by timer.
You can also send a log of trigger notifications once a day (see Page 59).
44 Operating Instructions
2.5 Configuring the Camera to Send Trigger Notifications