8.5 Restarting the Camera
You can restart the camera from the [Restart] page.
Note
• When the camera is restarted, all buffered images are deleted.
• When the camera is restarted, the alarm log content is deleted.
1. Click the [Maintenance] tab.
2. On the left side of the screen under [Maintenance], click [Restart].
3. Click [Restart].
Automatically restarting the camera
You can set the camera restart itself automatically periodically.
1. Click the [Maintenance] tab.
2. On the left side of the screen under [Maintenance], click [Restart].
3. Under [Scheduled Restart], click [Enable].
4. Select the days and times you would like the camera to automatically restart.
5. Click [Save].
Operating Instructions 123
8.5 Restarting the Camera
To Next Page
Loading...
