Panasonic BL-C111A - Network Camera - Pan - Viewing Buffered Images

2.6 Viewing Buffered Images
If you have configured the camera to buffer images (see Page 27 or Page 30), you can access the camera
and view the buffered images.
Note
• If you have configured the camera to transfer images by FTP, E-mail, or HTTP, images are deleted
once they have been successfully transferred and you cannot view the images using the procedure
described in this section.
1. Click the [Buffered Image] tab.
• The oldest buffered image for triggers 1–5 are displayed.
• If a trigger is disabled, or if the trigger has not yet buffered images, a gray screen is displayed.
• Date and time overlays, alarm state overlays, and text overlays may be displayed on buffered images
according to the [Overlay Setting] (see Page 110). See Page 9 for an example of a camera image
overlays.
1. Timer 2. Sensor 3. Motion Detection
4. Timer 5. Timer
2. Click the trigger title corresponding to buffered images you want to view.
50 Operating Instructions
2.6 Viewing Buffered Images