Panasonic BL-C111A - Network Camera - Pan - Using the Camera in Wireless Mode (BL-C131 A Only)

5.2 Using the Camera in Wireless Mode (BL-C131A
Only)
The BL-C131A can be used wirelessly. In this case, there is no need to connect a LAN cable to the camera.
In order to use the camera wirelessly, you must:
a. Configure the camera for wired connection. Refer to the included Installation Guide and Setup Guide if you
have not done this.
b. Configure the camera’s wireless settings (see Page 89).
c. Restart the camera in wireless mode (see Page 93).
88 Operating Instructions
5.2 Using the Camera in Wireless Mode (BL-C131A Only)