Panasonic BL-C111A - Network Camera - Pan - Adjusting Sensor Sensitivity

2.8 Adjusting Sensor Sensitivity
If using the camera’s built-in sensor to buffer or transfer camera images, you may want to adjust the sensor’s
sensitivity for optimal results.
1. Click the [Setup] tab.
2. On the left side of the screen under [Buffer/Transfer], click [Sensor Sensitivity].
3. Select the desired setting.
– [Low]: The sensor is less sensitive to heat variations (default).
– [Middle]: The sensor is moderately sensitive to heat variations.
– [High]: The sensor is more sensitive to heat variations.
4. Click [Save].
56 Operating Instructions
2.8 Adjusting Sensor Sensitivity