5.1.2 Proxy Server Settings
The following settings are necessary if your network uses a proxy server and you want to transfer images by
HTTP or send trigger notifications via HTTP. If you do not use a proxy server, these settings are unnecessary.
Note
• Consult your Internet Service Provider (ISP) or network administrator to find out if your network uses
a proxy server.
1. Click the [Setup] tab.
2. On the left side of the screen under [Basic], click [Network (IPv4)].
3. Under [Proxy Server Settings], enter the appropriate settings to use the proxy server.
• Ask your ISP or network administrator for the correct settings.
4. Click [Save].
Operating Instructions 87
5.1.2 Proxy Server Settings
To Next Page
Loading...
