5.6 Changing Audio Settings
The [Audio] page of the [Setup] tab allows you to adjust audio feature-related settings.
1. Click the [Setup] tab.
2. On the left side of the screen under [Basic], click [Audio].
3. Under [Input], select whether the camera’s built-in microphone is enabled or disabled.
4. Under [Camera Microphone Sensitivity], select the desired setting.
– [Minimum]: Sets the microphone to minimum sensitivity. Less sound is picked up by the microphone.
– [Standard]: Sets the microphone to standard sensitivity.
– [Maximum]: Sets the microphone to maximum sensitivity. More sound is picked up by the microphone.
5. Under [Mute during Pan/Tilt], select whether the camera’s built-in microphone is automatically muted when
the camera is panning or tilting.
• This feature is disabled by default.
• When this feature is set to [Disable], the microphone will be enabled when the camera pans or tilts.
The sound of the lens moving may be picked up by the microphone.
6. Click [Save].
98 Operating Instructions
5.6 Changing Audio Settings
To Next Page
Loading...
