3.4 Enabling and Disabling Image Buffering Using
Your Mobile Phone
While accessing the camera from your mobile phone, select [Buffer/Transfer] to display the image buffer and
transfer control page on your mobile phone.
Note
• You must be logged in to the camera as an administrator to use this feature.
1. Access the camera with your mobile phone (see Page 63).
2. Select [Buffer/Trigger].
3. Select the desired trigger number to turn the trigger on or off.
4. Select [Save] to turn the selected trigger on or off.
• All buffered images for the selected trigger are deleted when you click [Save].
5. Select [Control Page] when finished to return to the previous screen.
66 Operating Instructions
3.4 Enabling and Disabling Image Buffering Using Your Mobile Phone
To Next Page
Loading...
