2. Click [Save Settings to PC/Save Settings to Camera].
3. Click [Save Settings to Camera]. A dialog prompts you to specify the location of the saved configuration
file.
4. Specify the configuration file and click [Open].
5. Select the desired camera, then click [Execute].
6. Enter the camera’s administrator user name and password when prompted, then click [OK]. A dialog
displays the status.
7. xxCONFIRM SPEC
8. After the settings have been restored to the camera, the camera will restart automatically.
Note
• Network settings and the administrator user name and password are not changed when you restore a
configuration file using the Setup Program.
Operating Instructions 145
To Next Page
Loading...
