• The camera lens moves to the home position when it is turned on. You can change the home position if
necessary (see Page 22).
This feature can be disabled for general users (see Page 104) and for guest users (see Page 107).
Presets
Allow you to move the lens to a pre-programmed position (see Page 22). Click buttons 1–8 to move the lens
to the corresponding preset, or select the desired preset from the pull-down menu. You can also move the lens
to the home position by clicking the center navigation button.
This feature can be disabled for general users (see Page 104) and for guest users (see Page 107).
16 Operating Instructions
1.2.2 Aiming the Camera Lens
To Next Page
Loading...
