When [No encryption] is selected
When [No encryption] is selected, encryption will not be used for wireless communications, and therefore
wireless communication may not be secure. If you select [No encryption], click [Save] to finish.
When [WEP] is selected
When [WEP] is selected, the WEP standard will be used for encryption. Refer to the settings of your wireless
router, then select the WEP key (1–4) used by your wireless router, select the key format from the
corresponding pull-down menu, enter the WEP key, then click [Save] to finish
90 Operating Instructions
5.2.1 Configuring the Camera for Wireless Connection (BL-C131A Only)
To Next Page
Loading...
