When [WPA2-PSK (AES)] is selected
When [WPA2-PSK (AES)] is selected, the WPA2-PSK (AES) standard will be used for encryption. Refer to
the settings of your wireless router, then enter the [Network Key], select the key format from the pull-down
menu, and click [Save] to finish.
Key Format No. of Characters Usable Characters
[HEX, 64 Characters] 64 0–9, a–f
[ASCII, 8 to 63 Characters] 8–63 ASCII characters (see Page 147)
92 Operating Instructions
5.2.1 Configuring the Camera for Wireless Connection (BL-C131A Only)
To Next Page
Loading...
