b. Enter the month, day, and time when Daylight Saving Time ends. (The camera’s clock moves back
one hour at the set date and time.)
8. Click [Save].
• All buffered images for all triggers are deleted when you click [Save].
Note
• The camera will not synchronize to the NTP server if there is more than an 1 hour difference between
the NTP server time and the camera's current time. This is to protect the camera's time setting from
fraudulent NTP server tampering, incorrect time information, etc.
• The camera’s clock becomes less accurate over time and can be affected when the camera’s
temperature changes. Using the [Automatic Time Adjustment] feature is recommended.
96 Operating Instructions
5.4 Setting the Date and Time
To Next Page
Loading...
