Operating Instructions
43
Basic
(1) Network Configures network settings to connect the camera to the
network (see page
45).
(2) Wireless Configure a wireless network (see page 50).
(3) UPnP Enables automatic port forwarding and creates a shortcut
to the camera (see page 53).
(4) DynamicDNS Registers with the DynamicDNS service (see page 56).
(5) Date and Time Sets the date and time, automatic time adjustment and
summer (daylight saving) time settings (see page 62).
(6) Camera Sets camera name, white balance, AC power source
frequency and color night view (see page
64).
Account
(7) Administrator
*1
Sets authentication and administrator security (user name
and password) (see page 66).
(8) General User
*1
Sets general user security (user name and password) and
access levels (see page 71).
Buffer/Transfer
(9) Trigger Sets image buffer or transfer by timer or motion detection
(see page
74 or page 84).
(10) Motion
Detection
Sets the threshold and sensitivity for motion detection (see
page 97).
(11) Sensor Log Sets the information required to send log notifications by e-
mail (see page 100).
To Next Page
Loading...
Need help?
General
