Panasonic DC-BGH1

- 106 -- 106 -
5. Recording settings - Audio Settings
[Sound Rec Level Adj.]
Manually adjust the sound recording level.
Select [Sound Rec Level Adj.].
●
[MENU/SET] [ ] [ ] [Sound Rec Level Adj.]
Press to adjust the sound recording level and then press [MENU/SET].
●
You can adjust the sound recording level within the range from [MUTE], [–18dB] to [+12dB] in steps of 1 dB.
●
Displayed dB values are approximate.
●
When set to [MUTE], [ ] is displayed in the recording screen.
[Sound Rec Level Limiter]
The sound recording level is adjusted automatically to minimize sound distortion (crackling noise).
[MENU/SET] [ ] [ ] Select [Sound Rec Level Limiter]
Settings: [ON] / [OFF]
[Wind Noise Canceller]
This reduces the wind noise coming into the built-in microphone while maintaining sound quality.
[MENU/SET] [ ] [ ] Select [Wind Noise Canceller]
[HIGH]
This effectively reduces the wind noise by reducing the low-pitched sound when a strong
wind is detected.
[STANDARD] This reduces wind noise without loss of sound quality by filtering out only wind noise.
[OFF] ―
●
You may not see the full effect depending on the recording conditions.
●
This function works only with the built-in microphone. When an external microphone is connected, [Wind Cut] is
displayed. ( 141 / Reduction of Wind Noise)
[Lens Noise Cut]
You can reduce the zoom sound produced during video recording when you are using interchangeable lens compatible with
power zoom.
[MENU/SET] [ ] [ ] Select [Lens Noise Cut]
Settings: [ON] / [OFF]
●
When this function is used, the sound quality may differ from that during normal operation.